| |
Welcome.
|
|
|
Trail Doors w/ Hinges
|
|
Heavy Duty Lower Coil Spring Retainers
|
|
Our Price: $445.00
|
|
|
|
Our Price: $75.00
|
|
|
|
|
|
These doors are the result of too many long hot trail rides! They are perfect for those who want the cooling comfort and trail visibility of going doorless, but want a more secure feeling. They utilize our removable hinges and a cam latch that secures to your stock striker— so you can switch back and forth with your hard doors easily! Suzanne specifically requested the perfect armrest height, corner plate and close lower bar to keep your valuables from sliding out while on the trail. Made of .090 wall tubing for strength without being too heavy. A 1/2” hinge pin is built into the door that slides into a brass oilite bushing on the hinge. Come bare so you can paint to match your rig. We have clamp on mirrors and coves available to go with these.
|
Had a coil pop out under maximum flex? We have! So we designed these heavy duty replacements to securely hold your coils in place allowing full flex without fear of your coil popping loose! This one piece design replaces both of the OE pieces. It sits flat on top of the radius arm or our 4Link truss, reducing coil bowing. Combine with our axle wedges for axle conversions. Zinc plated for rust resistance. Fits EB & 78-79 Coils.
|
|
|
|
Stage 3 Tubular Radius Arms 66-77
|
|
78-79 Tubular Radius Arms
|
|
Our Price: $699.00
|
|
|
|
Our Price: $699.00
|
|
|
|
|
|
Ours are the only Early Bronco Radius Arms to utilize 2" diameter, 5/16" thick heavy wall tubing, cast iron head units, and massive 1" bore high quality Rod Ends for maximum strength. Arms are designed with built in caster, offset to clear larger tires and tight to the frame rail to improve ground clearance. 10 3/4" longer than stock—Moving the pivot point farther back vastly improving suspension travel and articulation, overall handling and control for on road driving. Built in lower shock mounts for use with stock shock mounting position or our Stage 2 Hoops and our Long Travel Shocks for 15" of travel. Best results are achieved when these arms are used in conjunction with Duff suspension components. Blue powdercoated for long lasting good looks. Requires reuse of original C-caps. Includes arms, head units, rod ends, bushings and all necessary mounting hardware. All new parts, no core necessary.
|
A kit just for you Full Size guys to install our Long Travel Radius Arms on the C-channeled framed Broncos. This kit includes arms, crossmember brackets, specially designed frame brackets with a backside reinforcement and riser brackets for the brake lines. The arms are the same proven design that we've been selling for years! Combine with our Cast C-Wedges, C-Caps and Spacers to swap in a new Dana 44 or Dana 60! Must have a 3.5 lift.
|
|
|
|
Duffy's Dark Gray Hoodie
|
|
Hi Ho Cartoon Shirt, Tan, Adult
|
Our Price: $25.00
Sale Price: $25.00
|
|
|
|
Our Price: $15.00
|
|
|
|
|
|
Heavy Weight 9.5oz 50/50 Cotton/Poly Hoodie in Adult sizes, S-XXL with Old School Softball Style Duffy's Logo on front and DUFFTUFF.com down the left sleeve.
|
Hi Ho Silver, Ben & Suzy on the trail in a cartoon done by George Trosley on the back. James Duff oval logo on the left front chest of a 100% cotton Tan shirt in adult sizes M-XXL.
|
|
|
|
|
|
Today's Super Deal! |
|
|
|
6° Solid Steel Leaf Spring Shims
|
|
Our Price: $49.00
|
|
|
|
Improper pinion angle can lead to driveline vibration and premature u-joint & cv-joint failure. Not all 3 1/2” lifts will require a pinion adjustment but going up to 5 1/2” will result in a driveline angle that will need corrected. These steel shims bolt on to the bottom of your leaf packs with longer center pins included. To determine the proper amount we recommend taking measurements before and after installing your suspension. The optimum angle is 2°. For more measuring info, please call.
|
|
|
|
 |
|
